A program started through runInTerminal had stdin from /dev/null, and CodeLLDB's launcher only hands the program a terminal it can read from when it runs on one. runInTerminal now starts the command on a pseudo-terminal, forwards its output to the console (CRLF as LF, without CodeLLDB's clear-screen request) and reports that the program takes input; while it runs, the console's input line goes to it, while paused it evaluates as before. debugpy and js-debug programs started in a terminal get the same.
A middle click on a tool window header hides the window, as its Hide button does; presses on the header's tabs and buttons keep their own behaviour. Editor tabs already closed on a middle click, except when Settings › Editor Tabs hides the close button: that marked the tabs as not closable, so a middle click (and Delete) did nothing. A tab item now hides only its close button and still closes.
Co-authored-by: Inf1mum <[email protected]>
PHP files and composer.json of a Composer project show a banner when vendor/autoload.php is missing or a package of composer.lock is not installed at its locked version (packages-dev only unless the install used --no-dev; config.vendor-dir honoured). Install runs composer install in the Run tool window with the PHP of Settings › PHP first on PATH; Ignore hides it until the project is reopened. Rechecked when composer.json, composer.lock or vendor change; not shown in an untrusted project. A Composer Install action does the same.
A project tab group in full screen uses simple fullscreen and keeps its title bar for the window buttons. AppKit's constrainFrameRect:toScreen: keeps a titled window below the camera housing whenever it is placed, shown or resized, so on a notched display the group sat 32 pt low with the status bar off-screen. Windows in simple fullscreen now keep the frame they ask for; every other window still goes through AppKit's constraint.
Co-authored-by: KJ-AIML <[email protected]>
close_project was a synchronous command, so it ran on the UI thread and dropped the project there: stopping its file watcher and index worker waits for the batch of file events they are applying, many while a build or rust-analyzer writes output. The command now runs off the main thread, and the project is dropped on the project shutdown thread, which a project opened next still waits for (the index database is released first). The window Destroyed path gets the same.
When a .php file has a .php-cs-fixer.php or .php-cs-fixer.dist.php above it and vendor/bin/php-cs-fixer is installed, Reformat Code and format on save run PHP-CS-Fixer on a temporary copy of the unsaved text with that configuration and apply the result as edits. PHP comes from the PHP interpreter setting, or PATH. A selection formats the whole file, with a note. Without a configuration, the language server keeps formatting.
New › PHP File writes <?php and the caret; New › PHP Class offers Class, Interface, Trait, Enum and PHPUnit Test with the namespace taken from the nearest composer.json's autoload / autoload-dev PSR-4 map (longest mapped folder wins; no namespace line outside every mapping). The New dialog shows 'namespace …', and Create New Test… on a .php file opens PHP Class with PHPUnit Test.
project.find-files walked the whole tree on every call; MyBatis Navigator calls it from editor providers interrupted after 500 ms, so on a large project each call timed out, counted as a crash, and the plugin was stopped after three. The host now answers from the project index (VCS-ignored and hidden files left out, as in the walk) and only walks the disk when no index covers the root yet.
Folders in composer.json's autoload.psr-4 become Sources Roots and those in autoload-dev.psr-4 Test Sources Roots (string or array values; paths into vendor/ or outside the folder are skipped). It runs before the package.json case, so a Laravel app's tests/ is credited to composer.json, and editing composer.json reruns detection.
Enter after a /** that opens a new comment closes it with the caret on the summary line, in every language with /* */ comments. Above a PHP function or method the stub lists its parameters (@param with the declared type, ... for variadics) and the declared return type (@return; none for void and constructors). Settings › Editor › General › Smart Keys › Enter › Insert documentation comment stub turns it off.
The VS Code presets list every IntelliJ action explicitly; the table editor's Submit / Revert actions were missing there, failing keymap.test.ts. They use ⌘↩ / ⌥⌘Z (Ctrl+Enter / Ctrl+Alt+Z on Windows), active only while a table editor's grid has focus.
A rust-analyzer built from source reports its own slow main-loop turns ("overly long loop turn took …") as error messages meant for its developers. They are logged now instead of shown as error notifications.
Delete… (⌫ / Delete) in the Changes tree was only offered for unversioned files. It now applies to any selected files still on disk, moving them to the Trash; a tracked file then shows as a deleted change.
Scroll to End, Soft-Wrap and Clear sat at the far right of the evaluate row, easy to miss or cut off in a narrow window. The Console tab now has the same vertical toolbar as the Run window: Find, Scroll to End, Soft-Wrap and Clear.
Starting OpenIDEA with a file showed the last session's tabs without the file: restoring the saved tabs counted as the user activating another tab, so the pending open of the launched file was dropped as superseded. Restoring a session no longer counts as an activation; the launched file opens next to the restored tabs and becomes active (also for a file opened with its project at startup).
⌘F12 / Ctrl+F12 in a focused table editor now opens Go to Column: the table's columns with types and key icons, filtered as you type; Enter selects that column's cell in the current row and scrolls to it. The grid also scrolls sideways when arrow keys or the search bar's current match move to a column outside the view.
The commits list and the changed files tree had fixed heights, so a push with one commit and many files left the files in a small scroll area and empty space above the buttons. They now sit in a vertical split that fills the dialog body, and the divider position is remembered.
A process: permission allowed while its program was missing has no pinned binary, so installing the program and restarting changes nothing. The error now says the program must be on PATH and that the permission has to be cleared and selected again in Settings › Plugins.
An external write that keeps a file's byte length and mtime was missed twice: the Maven launch fingerprint reused the stale class snapshot, and watcher events for clean open documents were dropped by the (mtime, length) stamp check.
The launch fingerprint now records a blake3 content hash for project files (toolchain inputs such as the JDK's lib/modules keep the stamp only) and bumps its version. Watcher events for clean documents compare the disk bytes with what saving the buffer would write; blind focus scans keep the stamp dedup, and forced refreshes after IDE disk operations still reload clean buffers.
Co-authored-by: qtvbwfn <[email protected]>
Workspace member roots were listed in manifest order. The Project and Project Files views now sort them by the displayed folder name with the same natural, case-insensitive comparison as tree entries; the stored member order is unchanged.
Co-authored-by: shohruh-genius <[email protected]>
Harbor Night and the theme reference were missing the --syn-php-variable / --syn-php-function-call tokens added for PHP highlighting, so scripts/theme/theme.test.ts failed on main.
Co-authored-by: shohruh-genius <[email protected]>
The table editor's Submit and Revert were toolbar buttons only. They are now the db.submitChanges and db.revertChanges actions, enabled while a table editor has focus and pending edits, bound to ⌘↩ / Ctrl+Enter and ⌥⌘Z / Ctrl+Alt+Z in the IntelliJ keymaps (unbound in Eclipse, where ⌥⌘Z is Surround With). A text field keeps ⌘↩ for its own edit (Value panel, large-value dialog), and query consoles keep Execute.
Closes#1549
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Detected PHP interpreters are sorted newest first, number by number and stable (PATH install first among equal versions), and the language level select and status bar menu list Auto, then 8.5 down to 5.6. With Default selected, the Version row now shows the version of the php found on PATH instead of the first list entry.
Closes#1557
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PHP discovery matched only the exact name php on PATH, so Debian/Ubuntu installs with several versions listed only the alternatives default. PATH directories are now also scanned for php<version> (php8.1, php81), skipping shim directories and the php-cgi/phpize/phpdbg helpers; the plain php comes first so /usr/bin/php is kept over the php8.3 it links to.
Fixes#1558
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Running a .php file or a #!/usr/bin/env php script used the PATH php: the file producer resolves tools on PATH and the settings pass only replaces a bare php command. A new sdk_php_effective command returns the configured interpreter (like sdk_python_effective) and the producer prefers it; the not-found text points to the PHP settings page.
Fixes#1555
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ruff is now an external formatter for Python next to the Ruff language server: Settings › Languages & Frameworks › Ruff has the executable path, a configuration directory (or file), the provider preference, enabled languages, run-on-save, and Reformat with Ruff. Formatting runs on the unsaved document through stdin (with Ruff's --range for selections, in 1-based code-point columns) and never writes the file first. The configuration directory is shared with Ruff LSP, which can then start without a root marker. Tools that can't format a language are rejected even when requested.
Co-authored-by: muutot <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Git log's changed-files pane can show the lines a commit added and deleted per file and as a total per directory and for the selection, from git diff --numstat -z -M over the same revision pairs as the file list (renames matched by either name). Off by default; turned on in Settings › Version Control › Log or the pane's View Options, so selecting a commit runs no extra diff unless asked.
Co-authored-by: liqiujiong <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Language smoke / Language smoke (kotlin) (push) Failing after 5s
Language smoke / Language smoke (go) (push) Failing after 7s
Language smoke / Language smoke (java) (push) Failing after 6s
Language smoke / Language smoke (python) (push) Failing after 4s
Language smoke / Language smoke (rust) (push) Failing after 5s
Language smoke / Language smoke (typescript) (push) Failing after 4s
CI / Plugins (SDK, official, fixtures) (push) Successful in 3m8s
CI / Cargo deny (push) Successful in 56s
CI / Remote server (linux musl) (push) Successful in 5m57s
CI / E2E (push) Failing after 15m56s
CI / Frontend (push) Failing after 24m3s
CI / Rust (ubuntu-22.04) (push) Failing after 46m51s
CI / Rust (macos-latest) (push) Canceled after 0s
CI / Rust (windows-latest) (push) Canceled after 0s
Python defaults diverged in several places: built-ins used the predefined magenta, __init__/__doc__ used function/self colours, instance fields the property colour, f-strings and byte strings the generic string colour, and the PEP 695 type keyword was uncoloured. Python now has its own tokens for built-ins, predefined definitions/usages, f-strings and byte strings; instance fields follow identifiers; type is a keyword. Unused parameters (not reported by Pyrefly) are greyed by a scope-aware local check that skips self/cls/_ names and signatures dictated elsewhere: stubs, @abstractmethod/@overload/@override, dunder methods and methods of classes with bases.
Co-authored-by: muutot <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
.log files rendered as plain text: the log language had no ui-mode and CodeMirror ships no log grammar. A lightweight Log stream mode now colours severity levels (upper case anywhere, any case only when marked: [warn], <Info>, level=error), timestamps, exception names, URLs and stack frames, reusing scheme colours; WARN uses the UI warning colour.
Closes#1541
Co-authored-by: jaw52 <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(editor): keep selections whole over line backgrounds and indent guides
Multi-line selections could show a 1px seam between their stacked
rectangles, indent guides showed as short dashes inside a selection,
and a breakpoint or execution line hid the selection past its text.
- Snap selection rectangle edges to device pixels so stacked pieces
share one edge.
- Paint caret-row, breakpoint and execution line backgrounds on a
pseudo-element below the selection layer.
- Draw indent guides on a pseudo-element above the text.
* test(e2e): check the visible selection layer in the theme flow
Rerunning a run tab launched the configuration snapshot taken when the tab first ran, so edits from Edit Configurations were ignored until the tab was closed. Every rerun path (Run tool window, Services, the exit notification, Debug from a run tab, Rerun Failed Tests / selected tests, Update Application's restart) now uses the saved configuration with the same id, falling back to the snapshot when it was deleted or never saved. Services also drops a configuration deleted after it ran once its run has ended; ad-hoc runs (build tasks, external tools) still show.
Fixes#1497
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ref-name inputs only validated after the fact, so a space typed or pasted into a branch name showed "Branch name contains invalid characters" and disabled Create. Branch-name fields (New Branch, from a revision and in several repositories, Rename Branch, New Worktree, GitHub New Remote Branch) now clean the name while typing: forbidden characters are dropped and whitespace becomes '-', without stacking separators, keeping the caret in place. Shared via src/platform/gitRefName.ts and the useSanitizedField hook in src/ui.
Closes#1553
Co-authored-by: jaw52 <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The preview wraps each top-level block in its own data-line element for scroll sync, so an HTML container (<details>, <div align=center>, <section>…) whose close tag came in a later block was closed at the first wrapper and its Markdown content spilled out: <details> couldn't be collapsed and centred README headers weren't centred. Blocks inside an unclosed container now share one wrapper up to its close, and the reader's open/closed state of each <details> survives edits in split mode.
Closes#1524
Co-authored-by: jaw52 <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PHP editors showed $variables and function calls in the plain text colour because Language Defaults leave both uncoloured. The built-in schemes now give PHP its own colours (PHP_VAR, PHP_FUNCTION_CALL): each scheme's instance-field purple and function colour; imported PHP colours and user PHP overrides still win.
Fixes#1532
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Tomcat ignores an app's META-INF/context.xml once conf/Catalina/localhost has a descriptor for it, and the run configuration always wrote a bare <Context docBase reloadable/>, dropping the app's Resource/Environment/Valve/Realm entries. The descriptor now starts from the app's own context.xml (exploded directory or WAR, all three deployment kinds) with docBase and reloadable set by the IDE and path dropped; unreadable or non-<Context> files fall back to the bare descriptor.
Fixes#1514
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ruby LSP showed Crashed and restarted for two reasons. A version-manager shim for ruby-lsp exists for every Ruby that ever had the gem, so when the active Ruby lacked it the shim exited on every start while the IDE counted the server as installed. And the IDE-managed copy lived in a gem home under Application Support, whose space broke ruby-lsp's re-exec through Bundler.
Shims that can't run the tool now count as missing. ruby-lsp is installed with the project's own Ruby (gem install in the project, so a version manager picks its Ruby). Its executable is looked up in that Ruby's gem bindir and user bin when they are off PATH (Homebrew), and those directories are added to the server's PATH.
Co-authored-by: kjeldahl <[email protected]>
The confirmation body joined the English question and the file list into one string, which never matched a catalog entry. The question is now translated on its own before the list is appended.
"Reopen projects on startup" only saved window groups, so windows opened with New Window were lost. The saved session now lists every open project window (groups with their tabs and selection, single windows on their own), and the previous run's session is read before this run first overwrites it, so the startup project can't replace it before the other windows are restored.
When the backend rejects an edit for any reason other than a stale version, the editor replaces its unsaved text with the file's content, but the reason was only printed to the webview console. The backend now logs the rejected edit with its path, and the editor writes the sync error and the discarded edits to the log file, so reports of edits that roll back (#1530, #1522) can be diagnosed from the log.
Python files got semantic colours only once the language server answered, and locals, globals, instance and class attributes, constants, properties and type parameters all looked the same. A highlighter on the Lezer syntax tree now colours them right away in PyCharm's finer categories (also self, builtins, decorators, definitions, method calls, brackets); LSP semantic tokens stay authoritative when they arrive. The categories are new --syn-python-* theme tokens wired through the built-in themes and Harbor Night, and PyCharm .icls schemes import their PY.* attributes.
Co-authored-by: muutot <[email protected]>
PHPStan results were only visible in a terminal. Saving a PHP file in a trusted project with vendor/bin/phpstan now runs phpstan analyse --error-format=json on the saved files (debounced, from the project root, on the selected PHP with XDEBUG_MODE=off) and shows its errors at their lines in the editor and Problems, with the PHPStan identifier as the code; saving the fixed code clears them. Settings > Editor > Inspections lists PHPStan under PHP with each reported identifier, so rules can be turned off or re-graded, and Settings > Languages & Frameworks > PHP > PHPStan selects another configuration file. A failing run is reported once as a notification; a newer save cancels a check in progress, and Restricted Mode stops it.
Closes#1212
Co-authored-by: DanielADK <[email protected]>
The diff and merge viewers had no overview lane, so changes outside the viewport were invisible. The scrollbar now marks every change, coloured by type (modified, inserted, deleted, conflict), in the side-by-side view (both panes), the aligned view (one stripe over the shared scroller), the unified view and the three-way merge editor; clicking a mark jumps to the change. Marks span the lane's width from the first to the last changed line with a 2px minimum. The colours are new --diff-*-stripe theme tokens (Darcula, Light and High-contrast values), mapped from ERROR_STRIPE_COLOR on .icls import and set in the Harbor Night theme template.
Part of #1505
Co-authored-by: jaw52 <[email protected]>
In a Unity project, Add File to Git for a new asset under Assets/ now takes its .meta along: an untracked .meta that already exists is listed in the same confirmation, and one Unity writes later is added once the asset's addition has succeeded. The ask / silently / never setting applies as before; pending metadata is dropped when the asset is unstaged or deleted, or the project or repository changes. File-operation paths are compared in IPC form, so they match the status paths on Windows.
Closes#1429
Co-authored-by: hacbit <[email protected]>
Parsing Minitest's console output needs -v, gives no file or line for passing tests and depends on how output interleaves. Ruby test runs (ruby and rake test configurations in the console) now load a small Minitest reporter through RUBYLIB/RUBYOPT that prints one record per test on stdout with its status, time, failure text and real file and line. The console strips the records and the test tree is built from them, so jump to source gets exact locations; the text parser stays as the fallback. It works on Minitest 5 and 6 (6 no longer loads plugins on its own, so a small hook registers the reporter once Minitest is loaded).
Co-authored-by: kjeldahl <[email protected]>
Ruby test runs showed only console text: there was no Ruby output parser and test_*.rb was not a test file. A Minitest parser now builds the test tree (class, test, status, time, failure text) from verbose output (-v / TESTOPTS=-v), test_*.rb counts as a test file, jump to source finds the class and then its def, and the gutter gets a run action per test method (coloured by the last result) and per test class and module that holds test classes; one test, class or module runs with --name=....
The streaming Find in Files helper the jump to source uses moved from the search feature to src/platform, so the run feature doesn't import another feature.
Co-authored-by: kjeldahl <[email protected]>
A Ruby file run from the context menu had no project load path, so require "foo" for lib/foo.rb failed: Sources roots are now passed as -I<root>. Folders under a test root get Run Tests in '<dir>': RSpec on the folder, rake test with TEST=<globs> (two comma-separated globs, since Rake splits TEST at commas), or a detected minitest configuration that loads every *_test.rb / test_*.rb under the folder when the project has neither.
Co-authored-by: kjeldahl <[email protected]>
Ruby had no coverage runner. Run with Coverage now works for ruby, bundle, rake, rspec and rails test configurations through SimpleCov, read from its .resultset.json (lines and branches). A project that starts SimpleCov itself keeps its own setup; otherwise a small preload starts it and writes the report to the IDE's run directory, so nothing is written into the project. The preload is loaded through RUBYLIB and a bare -r in RUBYOPT, because RUBYOPT can't take the spaces in the macOS data directory, and it steps aside in the bundle exec launcher, which loads it before Bundler puts the project's gems on the load path. A CI .resultset.json can be imported through Import a Coverage Report.
Co-authored-by: kjeldahl <[email protected]>
A successful commit cleared every inclusion override in the Commit tool window, so files the user had unchecked fell back to included and could go into the next commit by accident. commitChanges now drops the overrides (checks and per-file block exclusions) only for the changes that went into the commit; files left out stay excluded.
Closes#1539
Co-authored-by: xtr-hub <[email protected]>
l0ng-ai
Vadim LazukтаInf1mum
kjct0s_таKJ-AIML
Qingтаqtvbwfn
Shohruh Ismoilovтаshohruh-genius
JawтаClaude Opus 5.5
Jacob Kjeldahlтаkjeldahl
Muuтаmuutot
Daniel AdámekтаDanielADK
Hacbit
xtr-hubтаxtr-hub