With a PHP file focused, the status bar shows the PHP level Intelephense
checks against (`PHP 7.4`); the tooltip says where it comes from (the
settings, config.platform.php or require.php). Clicking it opens Auto (with
the composer.json version) and 5.6 to 8.5; picking one writes the same
project setting as Settings › Languages & Frameworks › PHP, so diagnostics
follow without reopening the project. The widget is hidden for other files.
For a file of a linked workspace project, the level comes from that
project's settings and the choices are disabled. The menu is also the
action "PHP Language Level".
Closes#1091
Co-authored-by: DanielADK <[email protected]>
Intelephense loads only its 68 default stub sets, so code using redis,
imagick, memcached, wordpress and the like showed "Undefined type", and
there was no way to point it at a platform's classes outside the project.
- Each ext-* in require or require-dev of the root composer.json adds its
stub set, and Settings › PHP › Additional stubs adds others (wordpress).
`stubs` replaces Intelephense's defaults, so the defaults are sent with
the additions; nothing is sent when nothing is added.
- Settings › PHP › Include paths: folders (absolute, ~/ or relative to the
project) sent as environment.includePaths.
Both apply on composer.json and settings changes without reopening the
project; Settings › Language Servers options still win.
Fixes#1232Fixes#1233
Settings › Build Tools › Maven gets Use Maven Daemon (mvnd) and a Maven Daemon home path. With it on, maven_command (the one launcher point for sync, goals and run configurations) resolves mvnd from the configured home, $MVND_HOME, PATH, Homebrew or SDKMAN instead of mvn / mvnw; it falls back to mvn, with a logged warning, when mvnd is missing or the project JDK is older than the Java 17 its daemon needs. Sync passes -T1 so the daemon's parallel build doesn't interleave dependency:tree output.
Co-authored-by: qtvbwfn <[email protected]>
Intelephense checked PHP code against its default 8.5, whatever version the project targets. Settings › Languages & Frameworks › PHP gets a PHP language level, Auto (default: composer.json config.platform.php, else the lowest version require.php allows) or 5.6–8.5, sent as environment.phpVersion; nothing is sent without a requirement. Intelephense applies the version only to documents it parses after reading its configuration, so servers that opt in (resync-on-configuration, Intelephense only) get their open documents again right after workspace/configuration is answered (new jsonrpc Handler::after_response), and Intelephense keeps one index per level because it fixes the built-in functions when it indexes. A change to a root or workspace member composer.json reconfigures the servers.
Co-authored-by: DanielADK <[email protected]>
Adds French as a UI language, with French catalogs for message keys and source text,
and the French space before a colon in settings labels.
UI languages are now registered in one place, `LOCALES` in `src/platform/i18n.ts` (name
in its own language and `<html lang>` tag); the Language and Region options, settings
validation and `<html lang>` all come from it. The catalog tests read every catalog in
`locales/` and `locales/text/`, so a new file is always checked, and literal message keys
given to `t` must exist in `en.json`. Only Chinese must cover every UI string; French and
Korean show English for text they lack.
Also makes two date tests independent of DST changes.
Co-authored-by: J-Dudek <[email protected]>
jdtls ran on the parallel collector, which never shrinks the heap while idle, so each server kept its import/build peak committed for as long as it lived. It now runs on G1 with a periodic collection every minute and a 10–30% free-heap band, so memory goes back to the OS once the work is done (a SkyWalking checkout: 1.9 GB → 1.25–1.3 GB idle). A collector set in the JVM options still replaces ours with its tuning; setting either heap-free ratio drops both of ours.
The Equinox launcher gets -nosplash: without it its native library loads AppKit on macOS and every jdtls shows as Not Responding in Activity Monitor.
Part of #1008.
The Gradle model came from a static parse of settings.gradle, which cannot follow includeFlat, projectDir assignments, computed include lists or included builds, so those modules were missing from the Gradle tool window, the Project view, indexing and run. Sync now runs an init script that prints every evaluated project (identity path, directory, build directory, source sets with test classification, Java version) without resolving dependencies; the static parser stays as the fallback before the first sync. Modules outside the root become content roots, the Project view lists the build's module group above the project folder, an unsynced Gradle build is imported once when opened, and staleness ignores comments and whitespace in build scripts.
Application / Spring Boot configurations of a Gradle module run through a JavaExec task on the source set's runtime classpath by default (Settings › Build Tools › Gradle › Build and run using), with the debugger attached to the forked JVM. The build model reaches run and the Project view through a platform store rather than a cross-feature import.
Fixes#737Fixes#861
Co-authored-by: ntbang0901 <[email protected]>
oxfmt ran only below an oxfmt configuration and reused the Prettier settings. It now has its own settings group and page (path, enabled languages, formatting provider, run on save) next to Prettier. For a language with an external formatter, oxfmt formats it when enabled for that language and either an oxfmt configuration is found above the file or oxfmt is the selected provider; otherwise Prettier, when enabled. Turning Prettier off for a language still leaves it to the language server. New Reformat with Prettier / Reformat with oxfmt commands run that tool regardless of the settings and report languages it cannot format.
Co-authored-by: d0whc3r <[email protected]>
Composer projects and PHPUnit suites are detected (Composer scripts, PHPUnit, artisan serve); PHPUnit runs report into the test tree through --teamcity with gutter runs for classes and methods, file-level runs, rerun failed and a PHPUnit run configuration type. Settings › Languages & Frameworks › PHP selects the CLI interpreter (discovered on PATH, Homebrew, phpbrew, phpenv, Herd, XAMPP, Laragon); it is applied to run configurations and PHP language servers through PATH. TeamCity service messages feed only the test tree and are kept out of the run console, sharing the stdout decoder go test -json uses.
Co-authored-by: ravuthz <[email protected]>
The Markdown preview had a fixed 14px body and notebook Markdown cells inherited the UI font size, so enlarging them meant scaling the whole UI. Languages & Frameworks › Markdown › Preview font size (application-level, 8–72, following the editor font size until set) now drives the preview and notebook Markdown cells; fenced code scales with it, and notebook code cells and outputs follow the editor font.
Fixes#768
Co-authored-by: jaw52 <[email protected]>
Ruby gets an ERB editor mode (HTML with embedded Ruby), Ruby / Rake / RSpec run configuration types, and a Settings › Languages & Frameworks › Ruby page for choosing the interpreter (Auto picks the `.ruby-version` / mise / asdf install, else `ruby` on PATH).
- Run: `.rb` scripts run from the editor context menu, `_spec.rb` / `_test.rb` files narrow an RSpec or Rake (`SPEC=` / `TEST=`) configuration, and Rakefile tasks are detected; Rake and RSpec go through `bundle exec` when the project has a Gemfile. The chosen interpreter's `ruby`, `bundle`, `rake` and `rspec` are used and its bin directory is put on PATH.
- Configuration forms rebuild from a raw command line keeping option values with their options (`--format documentation`, `-I lib`), and a new Ruby configuration opens in the Ruby form with the script still to fill in.
- External Libraries lists the Ruby standard library and the bundle's gems, including those Bundler installs inside the project (`vendor/bundle`).
- Ruby is part of the frontend settings defaults and normalization, so the selected interpreter survives a settings round-trip.
Closes#719
Co-authored-by: retsef <[email protected]>
Reformat Code only asked the language server for formatting, so files whose server has no formatting capability (Markdown with marksman, and others depending on the server) could not be formatted.
Languages can now declare an external formatter. Prettier is the first: a managed tool installed on demand, or the project's own node_modules/prettier, an explicit path, or PATH. It runs on the backend copy of the document with the file's path so Prettier resolves the project's config, overrides and ignore files, and its result is applied as one undoable edit. Language servers that format a file keep doing so unless Prettier is preferred in Settings › Languages › Prettier; formatting on save is opt-in. Parsers without range support format the whole file and say so.
Errors carry structured tool data, so a missing Prettier reuses the shared install prompt and Prettier diagnostics or timeouts show as non-sticky notifications.
Fixes#639
Projects now open with a user-owned trust decision. The prompt offers Preview in Restricted Mode, Don't Open and Trust Project, with an optional trusted parent folder; preview is the default focus so Enter never grants trust.
Restricted projects keep browsing, editing, saving, search and highlighting. Project-controlled execution is denied by default in the backend: run, debug, build, tools, language servers, plugins and Git commands that could honour repository configuration. Trusting a project enables those paths without reopening it, and decisions can be revoked in Settings.
Terminals stay available when the user opens one, without project shell settings, environment or virtualenv activation. A shell prompt that runs git in the folder can still honour the repository's core.fsmonitor.
Fixes#462
Go settings, execution, debugging and test reporting were disconnected, leaving Go projects without editable build/test fields and workspace maintenance actions.
- Add project build constraints that update gopls in place, and notices on excluded files.
- Add editable Go Build and Go Test configurations with directory, package and file targets, separate tool and program arguments, modules, environment, output selection and build-only execution, and pass the same settings to Delve.
- Decode Go JSON test output into the results view, with subtests, failures, skips and rerun failed. Add gutter targets for benchmarks and generate directives.
- Add module environment and vendoring settings, read go.work members, and offer tidy, download, sync and use from file menus.
- Add file and package generate actions, and format and organize imports through gopls on Save and Reformat.
- Show what a Go program prints in the debug console: Delve's debuggee shares its stdio, which no DAP event carries.
- Keep the default build output out of version control, and keep configurations produced by an earlier run out of the gutter choices.
Fixes#507Fixes#237
The Python interpreter widget published its shown flag from an effect that ran after the button rendered. A click landing in that window read it as false and opened Settings instead of the menu, which also made pythonStatus.test.tsx fail intermittently. The widget now keeps its resolved status in the store, and the render and the action read the same state.
Co-authored-by: a-rookie-of-C-language <[email protected]>
Recent Eclipse JDT LS releases need Java 25 to run, so projects on JDK 21 had no Java language support until the user downloaded a newer JDK by hand. When JDT LS is about to start, no installed JDK is new enough, and no language-server JDK is set explicitly, the IDE now downloads the Temurin JRE of the required version (about 50 MB, falling back to the JDK image where no JRE build exists) with a cancellable background task, then starts the server on it. The runtime lives in its own folder under the app data directory, outside the roots scanned for project JDKs, so the project JDK, run configurations and JDT LS's project runtimes are unchanged. One download runs at a time across windows and is reused; a failed attempt falls back to the existing manual Download JDK action and is not retried until the next start.
Fixes#258
Refs #271
未在 Windows / Linux 实机验证。
Adds Settings › Build Tools › Gradle: Gradle JVM (defaults to the Project JDK), distribution (wrapper or local installation with its home) and Gradle user home, stored in the project or global settings.
Sync and Gradle tool-window tasks use the configured JVM, launcher and GRADLE_USER_HOME. Run configurations keep their own choices: one that uses the wrapper runs gradlew, one that runs plain `gradle` resolves it from the local installation, then the pinned toolchain, then PATH; an explicit JAVA_HOME in the configuration wins over Gradle JVM. Derived defaults are applied at launch and not saved into run configurations. New Gradle configurations start with the wrapper off when the project uses a local installation.
Fixes#232
Adds knip (pnpm knip, knip.ts covering src, scripts, perf and e2e) and runs it in the CI frontend job. Removes what it reported: the unused codemirror and @types/dompurify dependencies, exports and test hooks used nowhere (AppLogo, Tooltip, barrel re-exports, duplicate default exports of lazily loaded settings pages), the unused iterateAll helper, and the zh entry for a deleted notification. rustfmt (used by lint-staged) is ignored as a toolchain binary.
Co-authored-by: jaw52 <[email protected]>
The status bar shows the project's Python interpreter when the project has Python files or configuration, with a warning state when none is set. Its popup lists detected interpreters (paths shown for same-named ones) and switches immediately through the project settings, which restarts the Python language server and re-resolves run configurations; Add New Interpreter… and Interpreter Settings… open the Python Interpreter settings page.
Fixes#138
Claude-Session: https://claude.ai/code/session_01Dq6jQQn8ZhRfkkyj3PRutA
jdtls was launched with -Xms1G and no heap cap or GC choice, so the JVM grew to a quarter of physical RAM during import and kept it. Default VM args are now ParallelGC with GCTimeRatio/AdaptiveSizePolicyWeight, -Xmx2G -Xms100m, disabled memory-mapped zips and VM-install detection, prepended as --jvm-arg so both the direct and launcher-script paths get them. User JVM options replace the matching default (heap, -D/-XX by name, any -Xlog, any GC flag drops the whole GC group).
Fixes#193
Claude-Session: https://claude.ai/code/session_01Dq6jQQn8ZhRfkkyj3PRutA
Hard-coded UI text, titles and aria-labels in about 110 components (Git panels, hierarchy, pull requests, dialogs, settings, welcome) now go through tx; spliced fragments became whole sentences (fileCount, noneFoundLabel, hierarchyTitle) and pull request states use keyed messages. 225 zh entries added, stale fragment entries removed.
Also: tx used as a tag without interpolations (tx`No checks`) now looks the text up exactly instead of as a template, so it is translated like tx("No checks"); the text-catalog test checks such tags as plain literals. Check and test counts reuse the existing "{count} passed" / "{failed} failing" entries.
Claude-Session: https://claude.ai/code/session_01VUYsdXA2nkF5v6zsC93dpn
Co-authored-by: jaw52 <[email protected]>
About 270 UI strings were JS template literals with interpolation passed to exact catalog lookup, so they could never be translated; about 25 more spliced lowercase English fragments into sentences.
`tx` now also works as a template tag (`` tx`Remove data source '${name}'?` ``): it looks up the entry by the literal parts (`{name}` placeholders), translates interpolated values that have entries, and remembers generated text so it re-translates after a language switch or when the catalog loads later. Call sites use the tag; spliced fragments are written as whole sentences per variant. Adds 280 Chinese translations and removes stale ones.
The catalog guard now also fails on untagged template literals reaching exact lookup (unless allowlisted with a reason), tagged text missing from the catalog, case-changed or ternary-suffix interpolations, and duplicate template patterns.
Claude-Session: https://claude.ai/code/session_01VUYsdXA2nkF5v6zsC93dpn
The global :focus-visible outline loads after the module CSS with the same
specificity, so every focusable container without its own override (the
Intentions list, other list/tree/menu popups) got a square blue frame. ee99b36
patched the Select popup only. Like IDEA, rings now mark controls (buttons,
links, fields, checkboxes, tabs…); lists, trees, tables and popups show focus
through their selected row, and the few rows that drew frames use the hover
background instead.
Claude-Session: https://claude.ai/code/session_01VUYsdXA2nkF5v6zsC93dpn
Root cause: the IDE only detected installed JDKs and had no way to get one, so any launch needing a newer JDK than the machine has (latest jdtls needs JDK 25) dead-ended in an error.
Fix: IDEA-style Download JDK (Eclipse Temurin via the Adoptium API, sha256-verified, reusing ide-tools' download/verify code; Windows zip, Linux tar.gz, macOS Contents/Home) into <app-data>/tools/jdks, registered with JDK discovery and rescanned after each download. "Download JDK…" in the Project SDK and Language Server JDK pickers; a one-click `java.downloadJdk` "Download JDK N" on "needs JDK N" errors, which also repoints a too-old language server JDK and restarts jdtls.
Siblings: language server status popup, jdtls launch notification, run console classpath error, debug launch, run configurations without a JDK ≥ the module's Java version, Maven/Gradle sync failures, single-file Java run without `java` on PATH.
Verified in the app on macOS: vendor/version/location queries, the Download JDK dialog from the Language Server JDK picker, a real Temurin 25.0.5 download that runs. Not verified on Windows/Linux.
Fixes#49https://claude.ai/code/session_01VUYsdXA2nkF5v6zsC93dpn
Root cause: `uses_lombok` only scanned build files ~3 levels below the jdtls root, so Lombok inherited from outside that tree was judged `Unused` and no `-javaagent` was attached — even when Lombok was installed in Settings.
Covered: parent pom only in the local Maven repository (settings.xml localRepository honoured, multi-hop, cycle-safe), parent via relativePath outside the workspace, outer Gradle root build / version catalog, `lombok.config` in ancestor directories, and a bounded source fallback (`import lombok.` / `@lombok.`) for convention plugins and BOMs. A Lombok jar installed in Settings is now always attached (like IDEA's always-on Lombok support). Detection in `java_resolve_launch` runs in `spawn_blocking`.
Fixes#33https://claude.ai/code/session_01VUYsdXA2nkF5v6zsC93dpn
Project & files
- Project view modes (Project Files / Open Files / All Changed Files /
Scratches); External Libraries for Python, JDK (src.zip), Node, Cargo, Go,
Maven/Gradle jars; read-only jar/zip browsing
- ⌘N New popup with type search and more file kinds; New Project, Rename
Project, Reload All from Disk, Export/Import Settings, Power Save Mode
- File type associations, extra content roots and exclude patterns (indexed
and watched without reopening the project)
Editor & navigation
- Find bar: search scope (comments/strings), Preserve Case, Exclude, multiline,
history; Find in Files: Module scope, custom pattern scopes, multiline
- Search Everywhere filters, Assign Shortcut, settings results; named bookmark
lists, file/folder bookmarks; Structure filters and Show Inherited; Recent
Locations timestamps and breadcrumbs; Code Vision author
- Completion options, editor tab placement/layout, inline completion (LSP 3.18)
- Spell checking (Typo inspection, ide-spell) and Inspections settings with
custom profiles; Code Style schemes, formatter markers, Do not format
Run, VCS, services, database
- Typed run configurations (Shell, Program, npm, Gradle, Maven, Docker,
Compound), Modify options, Before launch, env dialog, Current File,
Emulate terminal (PTY)
- Git log graph/view options, Go to Hash/Branch/Tag, date filter keeps the
graph; Pull/Merge/Rebase dialogs, Manage Remotes, Worktrees
- Generic Services host (Docker connections/registries, run sessions); TODO
scope/changes tabs with changelists; Coverage report import
- Data sources: wire-compatible vendors, URL import, SSL certs, Options,
Schemas and Advanced tabs, color and comment
Workbench
- Run Anything, Customize Main Toolbar, named tool window layouts, menu
completeness, Code Cleanup, macros, "Don't Show Again", editor banners
- Chinese translations for the new UI
Claude-Session: https://claude.ai/code/session_01SaPPsVPuk6ZTNsoUCNCbMv
- Languages & Frameworks › Java › Language Server › JDK (languages.java.jdtlsJdk) runs jdtls on its own JDK, like IDEA's JDK for importer; the project keeps compiling and running with the Project JDK.
- Toolchain pages get the Global / This project switch (default This project); Global shows and edits the global layer.
- File › New Projects Setup › Settings for New Projects… edits only the global layer, which new projects inherit.
- Configuration errors (launch_error) show as "Not started" instead of "Crashed".
Fixes#18Fixes#19
Claude-Session: https://claude.ai/code/session_01SaPPsVPuk6ZTNsoUCNCbMv
A long detail (an installation path) was not cut, so it pushed the option label out
(e.g. "Eclipse Adopti…", the Maven name hidden) and scrolled the popup sideways. The
label now keeps its width and the detail is cut with an ellipsis (full path in the
tooltip, detail text translated). Paths under C:/Users/<name> are shown as ~/…
The JDK was always picked automatically (JAVA_HOME, PATH, the usual install dirs, by the
module's Java version) and Maven was the project's mvnw or mvn on PATH, with no way to
override either. languages.java.jdk (Languages & Frameworks › Java › Project JDK) now sets
the default jdtls runtime, the JDK of Run/Debug and JAVA_HOME for Maven and Gradle;
languages.java.maven (Build Tools › Maven) sets the Maven home, -s and
-Dmaven.repo.local for sync, builds, tool-window goals and detected run configurations.
JDKs and Maven installations are detected for the pickers.
Closes#13
Message dialogs: `Dialog` gets an `icon` (question / info / warning / error)
that renders IDEA's alert layout: no title bar, a 32px icon, bold title,
text, checkbox under it. Every confirmation helper (prompt, VCS, services,
project tree, keymap, LSP choices, run, database, Replace All) uses it. Open
Project matches IDEA: "This Window" is the default and has focus. The Code
Analysis and TODO commit checks default to Review.
Project widget: the title bar project button opens a popup like IDEA's
ProjectWidget, with Open… / Clone Repository…, the projects open in other
windows (new `window_open_projects` command) and recent projects, filtered by
typing.
Chinese UI: UI text stays written in English and is translated through a
source-text catalog (`locales/text/zh.json`, about 2300 strings). The UI
primitives (buttons, checkboxes, selects, tabs, dialogs, menus, tooltips,
toasts, settings labels and hints) translate the strings they are given.
Action titles and categories are localised in the registry, and static JSX
text uses `<T>`, so text follows a locale switch without a reload. The
Settings window now syncs the locale too. Settings search matches both
languages.
Claude-Session: https://claude.ai/code/session_01B65qLEKnkeYTGdbwhLpjCu
* fix(java): Run jdtls with a Lombok agent and show build errors at launch
jdtls compiles with ECJ, which only generates Lombok members when the
server JVM runs -javaagent:lombok.jar. Nothing put it there, so @Data /
@Setter classes lost their accessors and Run launched stale classes
with "Unresolved compilation problem" stubs and no explanation.
- Projects whose build files mention Lombok get the newest jar: the
IDE-managed one (new "Lombok (jdtls agent)" tool, latest release from
Maven Central), else ~/.m2 (incl. settings.xml localRepository) or the
Gradle cache. Each agent gets its own jdtls workspace so everything is
rebuilt with it.
- Settings › Languages & Frameworks › Java › JVM options
(java.jdt.ls.vmargs); a Lombok agent there wins.
- Run (and Debug, as a notification) list the first compile errors when
the build has errors, plus a hint when Lombok is missing or older than
1.18.34.
Fixes#3
* fix(java): Base the Lombok hint on the agent jdtls actually runs
A Lombok agent in Settings › Java › JVM options wins over the managed
and cached jars, but the launch hint still looked only at those: with
no cached jar it said Lombok was missing, and with an old cached one it
blamed that version although jdtls ran the user's. The hint and the
startup warning now use the user's agent (version from its file name).
Daniel AdámekтаDanielADK
l0ng-ai
Qingтаqtvbwfn
Daniel AdámekтаDanielADK
Julien Dudek
ntbang0901
d0whc3r
Ravuthzтаravuthz
Jaw
Roberto Scinoccaтаretsef
arookieofcтаa-rookie-of-C-language